Diamond Saw Blade
Diamond blades are the blades used in lapidary saws. They are preferred to regular saw blades because they are designed to cut denser and harder materials. Diamond saw blades have diamonds evenly embedded into a metal matrix that makes up the rim, which cuts directly through the material.
More ...
TCT Saw Blade
Tungsten Carbide-Tipped (TCT) saw blades, are made with an alloy steel body and tungsten carbide inserts brazed to the tips of the teeth. These tips are ground on all surfaces to create tangential and radial clearance and provide the proper cutting and clearance angles on the teeth.
More ...
Core Drill Bits
Core bits are cutting tools used to remove a cylindrically shaped piece of material, called a core. Core bits have a hollow center, similar to hole saws, but differ in application. A hole saw is meant to create a large hole in a workpiece, while a core drill is designed to cut a hole and remove a core sample or to drill a hole without leaving material behind.
More ...
Carbide Bur & High Speed Steel Bur
Carbide Burrs are also known as Rotary Burrs and are used to cut, shape, grind, remove sharp edges, burrs, and excess material (deburring). It performs the rapid removal of extra fabric. Ironically, burrs are both referred to as leftover stock chips.
More ...
Carbide Milling Tools
Carbide Milling Tools are an important component of a milling machine. The milling cutter is the cutting tool used for scraping the excess material present outside the work-piece. All the milling machines contain a cutter.
More ...
Drill Bits
A drill bit is a cutting tool used to make or enlarge holes in solid material. These are used with a manual-operated drill or drill press equipped with a chuck. These drilling machines use a key to tighten or loosen the clamp.
More ...
Diamond Burs
A diamond burr is a type of rotary tool that uses a diamond-tipped bit to grind, smooth, or shape materials. It can be used on a variety of materials, including glass, metal, stone, and ceramic.
More ...
TCT Grass Cutting Blades
The TCT Saw Blades use on lawn mower, fast cuting for Brush cutting, Grass Trimmer.
More ...
Diamond Cup Grinding Wheels
Diamond segment cup grinding wheels install on angle grinders to smooth concrete, granite, stone, and aggregate. Rows of diamond-bonded segments on a metal body provide a stiff, stable surface that creates a smooth finish. Diamond wheels can be used wet or dry. Gaps between the abrasive segments allow dust and water to run off. Diamond is a hard abrasive that maintains a sharp edge.
More ...
Diamond Coated Tools
Diamond coated tools are made of synthetic diamond powder, measuring microns in grit and resin, as well as a metal or resin bonding material, or a combination of the two. Injection molding, hot and cold pressing, electroplating, and vacuum brazing are all used to achieve the desired shape to machine hard, easy broken or wear resistant material, such as zirconia, glass, ceramic, graphite, hybrid material etc.
More ...
Ceramic Burr
Ceramic burr are composed of a ceramic head with stainless steel shaft, which creates a bur which has many favourable properties.The type of ceramic used to form the head of the bur, Zirconia, is an excellent material to make a bur with due to its very high resistance to crack propagation. The Ceramic bur are use on dental lab and podiatry.
More ...
Step Drill
Step drill bits are a great tool to have in your shop. While many think that they are gimmicky, once you have one and use it you’ll understand why they are a popular drill bit for many trade professionals that drill holes through thin material such as sheet metal and acrylic.
More ...
Countersink
A countersink is an angled taper applied to a hole that allows a fastener (usually a flat head screw or similar) to sit even with, or below the surface which has been countersunk. Occasionally, a countersink is used simply as a method of chamfering or deburring a hole.
More ...
Dental Burs
Dental burs are used for cutting hard tissues - tooth or bone. They are made of steel, stainless steel, tungsten carbide and diamond grit. There can be a bewildering range of dental burs in any dental catalogue, but for basic veterinary use only a few burs are needed.
More ...
Dental CAD CAM Milling Bur
Dental CAD/CAM Milling Burs are used for cutting through hard areas in the dental cavity. This includes areas such as the bone, tooth, and other hard tissues in the dental cavity. The highlight of using these tools is that they allow you to make the most of CAD or CAM technology
More ...